Print Page | Close Window

Rollcage additional member bending freedom

Printed From: Official Baja SAE Forums
Category: General
Forum Name: Design Discussion
Forum Description: Discuss Design, Tech, Cost, and related issues
URL: http://forums.bajasae.net/forum/forum_posts.asp?TID=2739
Printed Date: May/20/2019 at 2:44am


Topic: Rollcage additional member bending freedom
Posted By: akshayelangovan
Subject: Rollcage additional member bending freedom
Date Posted: Jul/28/2018 at 3:12pm
If we have an additional member connect the SIM and the LFS, can it have a bend greater than 30 degrees while it's length is still below 33"?



Print Page | Close Window