Print Page | Close Window

June is Zero Tolerance Month!

Printed From: Official Baja SAE Forums
Category: General
Forum Name: Lounge
Forum Description: Talk about whatever
URL: http://forums.bajasae.net/forum/forum_posts.asp?TID=2188
Printed Date: Mar/28/2024 at 1:02pm


Topic: June is Zero Tolerance Month!
Posted By: Mod Squad
Subject: June is Zero Tolerance Month!
Date Posted: Jun/15/2015 at 2:42pm
The majority of the traffic on the forum lately has been useless posts from users wanting to be spoon-fed how to build a Baja car. That's not what this forum is for.
 
A few days ago, one of these users reported a 'regular' for answering an asinine post in a constructive manner. ie. You're asking to be spoon-fed, don't do that.
 
Enough is enough. Until the end of June, we're going to go with an aggressive stance and simply delete such posts. Maybe it'll slow the endless flow of thoughtless and useless posts.
 
If you post something like "How do I design steering system?", "What is the maximum inclination of hill test?", "How are inboard brakes?", etc, expect it to see the trash can. If you think these posts are very valid, perhaps go over to http://bajatutor.org/" rel="nofollow - http://bajatutor.org/  and try there...
 
 
 
 



Replies:
Posted By: breazy
Date Posted: Jun/15/2015 at 5:00pm
thank you.


Posted By: johnfar109
Date Posted: Jun/15/2015 at 7:16pm
Thank you 


-------------
- John Farnach

RIT BAJA SAE

That Guy 04-09'

RIT 2010 Maneuverability Captain & Track Prep and Construction
RIT 2013, 2016, 2019 Electronic Scoring & Track Prep and Construction


Posted By: RLM
Date Posted: Jun/15/2015 at 11:45pm


-------------
McMaster Baja Racing (09-Dec 2015)
Team Captain 2012-2015
Suspension Lead 2015-2016
All spoonfeed PM requests will be billed at $10 USD per reply, payable via paypal.


Posted By: Pedro UFPBaja
Date Posted: Jun/16/2015 at 5:22pm
some of them are kinda funny.

-------------
Former Team Captain


Posted By: rasmuet
Date Posted: Jun/17/2015 at 8:23am

Just this morning we got "How do I tune my cvt?" and "how do I design a trailing link suspension geometry?"...smh.



-------------
Erik
Iowa State Baja 2011-Dec 2014
Drivetrain Design 2013, 2014, 2015
2014 Kansas - Car #45 - 1st Place Endurance


Posted By: Mod Squad
Date Posted: Jun/17/2015 at 10:53am
*poof* They're gone


Posted By: Mod Squad
Date Posted: Jun/23/2015 at 10:59am
Was out of pocket over the weekend. AHOY, more deletions!


Posted By: Bettner12
Date Posted: Jun/23/2015 at 5:13pm
can we vote to make this a forever thing? 

-------------
Penn College of Technology Alumni

Maryland 2018 Organizer





Posted By: RLM
Date Posted: Jun/06/2016 at 8:16am
this needs to start back up

-------------
McMaster Baja Racing (09-Dec 2015)
Team Captain 2012-2015
Suspension Lead 2015-2016
All spoonfeed PM requests will be billed at $10 USD per reply, payable via paypal.


Posted By: sujandinesh
Date Posted: Jun/06/2016 at 11:38am
^+1
Agreed.


-------------
RVCE BAJA: 2011-2015
General Motors: 2015-2016
Tyre Testing - University Racing Eindhoven: 2016-2017
Tyre Dynamics - TASS International: 2017-2018

Tyre Engineer - Apollo Vredestein
The Netherlands


Posted By: Nate
Date Posted: Jun/07/2016 at 1:22am
It's virtual baja season isn't it? I'm on board too.

-------------
Iowa State University Cyclone Racing 2013 - 2016
Tech Director, DAQ, Media, Manufacturing, Radios
2016 - S&T, Maneuv, & Endurance Driver
"Because BAJA" "Because RACECAR"


Posted By: sujandinesh
Date Posted: Jun/07/2016 at 8:26am
Yes it is!

Why do you think the forum is so active around the clock?


-------------
RVCE BAJA: 2011-2015
General Motors: 2015-2016
Tyre Testing - University Racing Eindhoven: 2016-2017
Tyre Dynamics - TASS International: 2017-2018

Tyre Engineer - Apollo Vredestein
The Netherlands



Print Page | Close Window