Print Page | Close Window

1mm thickness

Printed From: Official Baja SAE Forums
Category: General
Forum Name: Design Discussion
Forum Description: Discuss Design, Tech, Cost, and related issues
URL: http://forums.bajasae.net/forum/forum_posts.asp?TID=1398
Printed Date: Dec/08/2021 at 4:23pm


Topic: 1mm thickness
Posted By: Himeel
Subject: 1mm thickness
Date Posted: Jun/22/2013 at 10:05am
Is it advisable to use 1mm thickness AISI 4130 tubes for rollcage secondary members like USM, FAB, LDB etc?
We get good fos at 3g and 4g loads.



Replies:
Posted By: Richie_Dagger
Date Posted: Jun/22/2013 at 12:30pm
Sure, We used 0.035 4130 for almost every tube that wasn't primary.



Print Page | Close Window