Seat Mounting |
Post Reply |
Author | |
AgentP
Double Secret Probation Joined: Jun/27/2017 Status: Offline Points: 3 |
Post Options
Thanks(0)
Posted: Dec/31/2018 at 4:52pm |
https://imgur.com/VVJ2jOv
In the image there are 3 tubes attached across LFS with holes drilled for seat mounting. The holes are drilled on a square cross section tube of dimensions 20x20x2 mm. So, I wanted to know if using a rod of thickness 2mm instead of a tab of 2.3 mm thickness is allowed or not. If yes, do I need to use a sleeve for a square rod as per rule for drilled members. Also is it allowed to keep holes beyond 1in distance from weld in this case.? Though the arrangement does not exactly follow the rules, the arrangement is still quite sturdy since the seat now has a support of 4 members including the USM
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |