Poll: CG vs. Wheelbase |
Post Reply |
Author | ||
adrive7
Baja Godfather Joined: Oct/19/2008 Location: Lancaster, CA Status: Offline Points: 711 |
Post Options
Thanks(0)
Posted: Dec/13/2008 at 2:45pm |
|
Ok folks,
Higher CG with a shorter wheelbase, or a lower CG (- ~6") with a longer Wheel base(+ ~6")? Discuss. Edited by adrive7 - Dec/13/2008 at 5:11pm |
||
-Joe
Chief Organizer, Baja California 2016, 2017, 2019 Ohio State Baja 2005-2009 Co-Host, Science... Sort Of http://www.sciencesortof.com |
||
thompm1
Milling Master Joined: Oct/23/2008 Location: VA Status: Offline Points: 72 |
Post Options
Thanks(0)
|
|
how about lower CG and same wheel base
|
||
Michael
No Monkeys f**king footballs |
||
dillon_b12
Baja Godfather Joined: Nov/15/2008 Status: Offline Points: 781 |
Post Options
Thanks(0)
|
|
Lower CG, longer wheelbase.
Wheelbase can become an issue if made overly long because of high-centering on obstacles but I think lowering the CG is a more important concern.
The lower you can get that CG the harder the car can be driven in to turns, hopefully generating some oversteer along the way.
|
||
dillon_b12
Baja Godfather Joined: Nov/15/2008 Status: Offline Points: 781 |
Post Options
Thanks(0)
|
|
Agreed. Lower CG FTW always but I don't think lengthening the wheelbase is always a great idea.
|
||
adrive7
Baja Godfather Joined: Oct/19/2008 Location: Lancaster, CA Status: Offline Points: 711 |
Post Options
Thanks(0)
|
|
We were leaning towards the lower CG as well. The options are drop the engine to the floor and push the gearbox out the back, or raise the engine and run the gearbox vertically. Option 1 keeps the entire drivetrain nice and low, it just pushes the back end out about 6 inches.
Thanks for the quick replies. We need some more people on this forum. BajaSAE.net >> SAE forums. |
||
-Joe
Chief Organizer, Baja California 2016, 2017, 2019 Ohio State Baja 2005-2009 Co-Host, Science... Sort Of http://www.sciencesortof.com |
||
CLReedy21
Baja Godfather Joined: Nov/30/2008 Location: Marysville, OH Status: Offline Points: 736 |
Post Options
Thanks(0)
|
|
We run an artificially high CG and a medium to long wheelbase on our cars so that they have a very loose rear end. However you end up with a car that needs to be driven at 9/10ths to handle properly but if driven at 10/10ths is very roll happy. We run the swingarm so our cars are different animals from the get go. Another swingarm team, USF, runs a super low CG and their cars are very slide happy and handle great (thanks for the test drive guys :) Overall the CG and the wheelbase have a huge effect of the vehicle dynamics, but often can be mitigated with suspension tuning and tire selection. Our cars usually handle pretty well, but with shocks that are slightly too stiff or tires that are too soft the cars will either not turn enough or will simply flip over after kicking the rear end out. Whichever design you choose just try not to push either dimension to the extreme and you should be able to tune your car to handle the way you want later as long as your car isn't super long or precariously tall.
|
||
-Chris Reedy
TTU Alumni Fourwheeler Drawer "Quick with the hammer, slow with the brain." |
||
jarmumd
Organizer Joined: Oct/17/2008 Location: Huntsville, AL Status: Offline Points: 178 |
Post Options
Thanks(0)
|
|
Here are some fun facts from my time in baja... In our 2005 baja car, I ( a 6' 5" 250lb driver) created a lower CG than our shorter lighter ( and better) driver. I'll try to dig up some pictures of the tests that I did. My theory is that taller heavier drivers have more leg mass than torso mass and that drives the CG down. We ran a rear steer system that was based on vehicle roll. So CG was really important. I think you want a CG height that is comfortable for you to induce oversteer into the car. If the car is too long, I think you end up with too much polar moment of inertia in the car. Although I don't agree with the look of either of the TTU or USF cars, i think you can say that there must be a good CG vs wheelbase since Auburn, ETS, old Sherbrooke, RIT and Michigan (kinda short for my taste)... Seems to be a sweet spot for vehicle design, but I certainly won't deny that other designs work just as well...
|
||
mikez
Rules Reps Webmaster Joined: Oct/09/2008 Status: Offline Points: 150 |
Post Options
Thanks(0)
|
|
Agreed. Glad you guys like it. We always wanted something better when I was doing Baja, so I decided it was time to go there. Hopefully we can continue to raise awareness about this site at the 2009 competitions. I'll continue to support these new national Baja forums as long as people make good use of them. By the way, there's more cool stuff in the works coming later in 2009. If there's anything else you guys would like or might find useful, feel free to suggest. Thanks, -Mike |
||
karman1970
Milling Master Joined: Nov/18/2008 Location: Ft Worth,TexASS Status: Offline Points: 51 |
Post Options
Thanks(0)
|
|
One of the primary rules of racing is to get the CG as low as possible. The driver makes a big difference in our light-weight cars. The only things that should limit the wheelbase are turning radius and concerns over high-centering. Our first car was around 80". Cut it down to 66, then 60, and even 54 on our still-born #2 car last year. We're back up to 66" this year. The 6 extra inches of wheelbase probably won't hurt, unless it's already pretty long. BTW, we put the engine on top of the trans, usually because of packaging issues. The CG only changes a couple inches.
Edited by karman1970 - Dec/14/2008 at 5:29am |
||
adrive7
Baja Godfather Joined: Oct/19/2008 Location: Lancaster, CA Status: Offline Points: 711 |
Post Options
Thanks(0)
|
|
Might I suggest a sticky thread of features people would like to see? |
||
-Joe
Chief Organizer, Baja California 2016, 2017, 2019 Ohio State Baja 2005-2009 Co-Host, Science... Sort Of http://www.sciencesortof.com |
||
dillon_b12
Baja Godfather Joined: Nov/15/2008 Status: Offline Points: 781 |
Post Options
Thanks(0)
|
|
I agree that cars don't have to be swingarm or overly long to handle well. The old green Sherbrooke car is still one of the best handling Baja cars I have ever seen. That car wasn't overly wide or long, handled ridiculously and was a trailing arm car. The swingarm cars do have a certain advantage in handling but a properly designed and built independent car can do the same with other desirable suspension characteristics. I also agree that tire choice is extremely important. This year we are putting new tires on all of our old cars and testing each set individually on our new car to hopefully find something better than we run now.
|
||
mikez
Rules Reps Webmaster Joined: Oct/09/2008 Status: Offline Points: 150 |
Post Options
Thanks(0)
|
|
Absolutely. Suggestions for BajaSAE.net: http://forums.bajasae.net/forum/forum_posts.asp?TID=26 Thanks. Edited by MikeZ - Dec/15/2008 at 2:56am |
||
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |